Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Hello from me
#1

Methods Of Installing Vinyl Plank Flooring

Vinyl plank flooring is a more economical choice than other floor types. Another main appeal is how it can mimic the look and feel of stone and hardwood flooring. This makes this material an attractive choice for budget-conscious homeowners.

Check This Out:

Best Mop for Vinyl Plank Floors: Buying Guide and TOP Suggestions

Best Mop for Vinyl Floors: Buying Guide and TOP Suggestions

On top of that, DIYers can learn to install vinyl plank floors without professional help. If you want to have more control over the installation of your vinyl flooring, check out the brief introduction below. It will give you an idea about which is the best way to do so efficiently and easily in your house.

Types Of Vinyl Plank Flooring

There are many types of vinyl plank, each of which is more suitable for a renovation need. Overall, we can put vinyl planks into three categories based on the installation method: glue down, click-lock, and GripStrip.

There are two adhesive types you can use to bond the glue down vinyl planks into the subfloor: pressure-sensitive and hard-set.

Some planks come with pressure-sensitive adhesive already placed on their bottom. They will adhere to the subfloor when you press them into place. Hard-set adhesive must be manually spread along the surface of the subfloor. You will then lay down the vinyl planks on top of it.

Both of these adhesive types are durable and can produce long-lasting results. But as far as replacement is concerned, you will have a much easier time with the pressure-sensitive adhesive.

[Image: hZSnTtp.jpg]

The GripStrip method also makes use of a manufacturer-applied adhesive. However, the result of this connection between planks is just a floating floor.

This means the final assembled vinyl planking only sits on and covers the subfloor, not adhering or being fastened to it in any way. This also makes installation and replacement a breeze as it makes it possible to easily install a new floor without having to remove the current floor first.

While blue down and GripStrip vinyl plank flooring heavily utilize adhesive to connect the planks, this is not the case with the click-lock (or interlocking) type. In order to create a floating floor, you will have to snap all the tongue-and-groove joints that come with them, to interlock the planks in place.

It is important to note that GripStrip flooring is typically only water-resistant, while you can achieve total waterproof with the click-lock type. Keep this in mind when you need to buy a vinyl floor mop.

Novices can get a firm grasp of all of the installation methods in no time. Just follow the instructions and you can lay vinyl planks over a subfloor with great success. You can pick a method according to the conditions of the room you plan to renovate and your personal preference. If you want to learn more about different types of plank flooring, check out this guide https://streetvoice.com/bestvacuumcleaners/songs/701401/

Tools Needed To Install Vinyl Plank Flooring

If you need to cut the planks, a utility knife should be enough for simple cuts. Dedicated cutters are a good idea too.

However, for complicated cuts, you may need a miter or jigsaw saw. Other necessary tools include a vacuum cleaner, a crayon or chalk, and measuring tape. Some flooring makers recommend a rubber mallet and tapping block.

[Image: 13CjtAA.jpg]

Conclusion

It is actually easy to install vinyl plank flooring by yourself. Choose the right method and get the right tools, and you have a new floor with minimal effort. And regardless of your choice, consider the best mop for Vinyl floors to prolong its new look.
Reply


Messages In This Thread
Hello from me - by kangnguyen - Dec 21, 2019, 02:50
RE: Hello - by Barbara G. - Dec 21, 2019, 09:41

Forum Jump:


Users browsing this thread: 1 Guest(s)