Handling Thread Adapters - Printable Version

+- DSLR Photography Forum (https://www.shuttertalk.com/forums)
+-- Forum: Digital Photography Forum (https://www.shuttertalk.com/forums/forum-4.html)
+--- Forum: Main Photography Discussion (https://www.shuttertalk.com/forums/forum-17.html)
+--- Thread: Handling Thread Adapters (/thread-8386.html)

---

Handling Thread Adapters - Don Schaeffer - Jan 29, 2008

Has anyone had the experience with thread adapters (like 49->55 mm adapters for example) which appear to freeze in the threads so you can't remove them. I go into a panic until the eventually unscrew. Anybody have ideas about handling these.

---

Handling Thread Adapters - matthew - Jan 29, 2008

I sometime have that problem with my polarizer, which is hard to get a grip on, and the occasional UV filter that I use. I can fight them for half an hour without success, and then they ...just come off.

I carry several rubber bands in my camera bags to wrap around my filters when I need the extra grip, which does help with the leverage, but otherwise I haven't found the trick to make them ...just come off.

---

Handling Thread Adapters - Keith Alan - Jan 30, 2008

I frequently stack up to four filters when shooting infrared.
Never a problem after I learned my lessons:

1) Never tighten beyond a gentle "it's almost tight" feeling of snug.
2) Take them apart at the same temperature as when they were assembled.

When I would put my CP filter on the camera in an air-conditioned house or car, then shoot outside in the Texas heat--Stuck.
Let it sit inside and cool off for an hour--unstuck.

Same thing when I put together filters outside in the heat then bring the camera indoors.
I would have to put the camera in the garage for awhile until the temperatures equalized.

Leaving them slightly loose eliminates all of this for me.
By this I mean tighten the filter to where you usually would, then untwist by a few millimeters.
They still stay where they belong, but no longer fight you.

---

Handling Thread Adapters - Don Schaeffer - Jan 30, 2008

Thanks for the synoathy Matt. Thanks for the wisdom Keith.

---