Posts: 24
Threads: 4
Joined: Nov 2013
Reputation:
0
Hello can anyone help me? I have a Canon 60d, it's been working fine until suddenly it wouldn't take a picture, it auto focuses ok but when the shutter release button is fully pressed it sometimes works after a delay of no specific time, other times it won't work at all. I've checked settings over & over,also tried all the metering modes with no success, wondered if anyone has had the same problems or maybe an idea of what is going on.
Thanks in anticipation Graham
Posts: 3,694
Threads: 243
Joined: Oct 2004
Reputation:
11
When it does take a picture, does the image look okay? Any black banding?
Have you tried a different memory card? (thinking maybe a damaged contact)
How many pictures have you taken with the camera roughly?
Posts: 2,744
Threads: 100
Joined: Jul 2013
Reputation:
7
Is Factory Reset, a capability. Ed.
To each his own!
Posts: 404
Threads: 23
Joined: Nov 2013
Reputation:
0
Couple of things.... firstly... settings... is the camera looking for f2.8 and all it can get due to the lens is f4 in a low light situation... moving the camera may then change the light meter reading and f4 will do and it fires?
These shutters are electrical... so may have a dirty contact send it to Canon for cleaning. Not sure on the number of actuations, but the shutter button electrics may have failed or at least are on their way out making intermittent contact. Send it back to Canon! Try recycling the power, I have heard that on the older 30D that had similar issues, that seemed to be a fix even if temporary.
If you are in UK any where near Elstree, go to the Canon Repair Facility and Pro Centre and they will have a look at it generally there and then. They will be able to advise the issue, costs and down time. You can if you wanted to then leave it with them and they will send it back to you.. after you stumped up the cash!  Otherwise your local Canon dealership...
I hope that has helped...
Good luck
Kind regards
Rolf
In photography, the smallest thing can be a great subject. The little human detail can become a leitmotiv.
—Henri Cartier-Bresson
Posts: 404
Threads: 23
Joined: Nov 2013
Reputation:
0
Had a few more thoughts on what you can try... Is the door shut properly on the media card slot? That has an interlock to prevent firing... although a total disconnect usually means the whole camera is dead. Have you inadvertently got the camera in mirror lock up mode... press shutter once for mirror lock and again to fire?
You could try flooding the shutter button area with isopropyl alcohol- rubbing alcohol... carefully...that may help to wash away any residues from skin oils or other contaminants that may be on the shutter button contacts... if it does... it's a temporary fix but does show that all you need is a clean... Canon though will probably go for a replacement mechanism... that way you wont get the issue recurring!
Could also try cleaning the battery contacts in case it's a low voltage issue. Worth checking the output voltage from the battery too... swap for a known good battery and try shutter again... Clean the lens to body contacts... the camera may not be communicating with the lens too well... again with the alcohol.
Go to your Menu and try a reset to factory ... then see if the problem persists... if it does... chances are it's not an erroneous setting but points to the shutter mechanism itself... either needing cleaning or replacing... also try a different lens.... if that work OK... the original lens may have an issue...
Go to a Dealer and try a battery grip and see if the camera fires normally using the grips' shutter release...if it does and you can live with it, it may be a cheaper alternative to a strip down and clean or replacement shutter.
Can't think of any thing else... Quite a lot to consider but the whole camera is an assembly of interconnected parts each one having some affect on the other... much like the computer it is I suppose...
Kind regards
Rolf
In photography, the smallest thing can be a great subject. The little human detail can become a leitmotiv.
—Henri Cartier-Bresson
Posts: 404
Threads: 23
Joined: Nov 2013
Reputation:
0
I should mention that if you do introduce the rubbing alcohol to any electrical circuit on your camera... it's best to remove the battery or any other source of power to those circuits first It is also volatile and the vapours are flammable. Not a beer substitute  .. it's also toxic. One last thing... try not to spill it and wood furniture that has a finish to it... the Isopropyl alcohol is after all a solvent... found in many wood finishing products!
Kind regards
Rolf
In photography, the smallest thing can be a great subject. The little human detail can become a leitmotiv.
—Henri Cartier-Bresson
Posts: 24
Threads: 4
Joined: Nov 2013
Reputation:
0
(Feb 2, 2015, 10:40)EnglishBob Wrote: When it does take a picture, does the image look okay? Any black banding?
Have you tried a different memory card? (thinking maybe a damaged contact)
How many pictures have you taken with the camera roughly?
Hello Bob when it takes a picture it's fine, focus, exposure good,no banding tried different card no difference, shutter count is 9300. The count is from the continuous count on the card, last image. Sounds about right, camera 2 yrs old
Thanks Graham
Posts: 24
Threads: 4
Joined: Nov 2013
Reputation:
0
(Feb 2, 2015, 10:58)EdMak Wrote: Is Factory Reset, a capability. Ed.
Hello Ed Mac tried factory reset, resetting in 2 menus, switched off, removed battery, waited replaced battery,tried again still same.
Cheers Graham
Posts: 24
Threads: 4
Joined: Nov 2013
Reputation:
0
(Feb 2, 2015, 11:19)Rolf Wrote: Couple of things.... firstly... settings... is the camera looking for f2.8 and all it can get due to the lens is f4 in a low light situation... moving the camera may then change the light meter reading and f4 will do and it fires?
These shutters are electrical... so may have a dirty contact send it to Canon for cleaning. Not sure on the number of actuations, but the shutter button electrics may have failed or at least are on their way out making intermittent contact. Send it back to Canon! Try recycling the power, I have heard that on the older 30D that had similar issues, that seemed to be a fix even if temporary.
If you are in UK any where near Elstree, go to the Canon Repair Facility and Pro Centre and they will have a look at it generally there and then. They will be able to advise the issue, costs and down time. You can if you wanted to then leave it with them and they will send it back to you.. after you stumped up the cash! Otherwise your local Canon dealership...
I hope that has helped...
Good luck
Kind regards
Rolf Hello Rolf thanks for your info, I have tried everything you said ,no good, I think I will have to send it for a good clean & service. By the way I'm in Cornwall,not near Elstree but have found a good camera service centre in Bodmin, not far from me, I think a service will do it good. Will let you know how I get on. Thanks again for your help. Graham
Posts: 404
Threads: 23
Joined: Nov 2013
Reputation:
0
I hope it works out for you!
Kind regards
Rolf
In photography, the smallest thing can be a great subject. The little human detail can become a leitmotiv.
—Henri Cartier-Bresson
Posts: 2,744
Threads: 100
Joined: Jul 2013
Reputation:
7
Leave the battery out overnight. Ed.
To each his own!
Posts: 58
Threads: 0
Joined: Jun 2014
Reputation:
0
not sure if this is your problem but have you checked the shutter 'Drive Mode'? (on Quick menue a the bottom.) Could be you have inadvertently set it to time delay of 2 or 10 seconds| ...... and yes, I have done this very thing myself 
Posts: 24
Threads: 4
Joined: Nov 2013
Reputation:
0
(Feb 7, 2015, 08:36)dave1712 Wrote: not sure if this is your problem but have you checked the shutter 'Drive Mode'? (on Quick menue a the bottom.) Could be you have inadvertently set it to time delay of 2 or 10 seconds| ...... and yes, I have done this very thing myself
Thanks Dave for suggestion but I have checked that.
I know what you mean though it is so easy to change something and not notice it. I have sent it to be repaired & serviced now. Just too many strange things happening, seems to have a mind of its own.
Thanks Graham
Posts: 3,694
Threads: 243
Joined: Oct 2004
Reputation:
11
(Feb 7, 2015, 08:36)dave1712 Wrote: not sure if this is your problem but have you checked the shutter 'Drive Mode'? (on Quick menue a the bottom.) Could be you have inadvertently set it to time delay of 2 or 10 seconds| ...... and yes, I have done this very thing myself
I should of thought of this, done it more than once myself LOL.
Posts: 1,246
Threads: 27
Joined: Oct 2013
Reputation:
7
I do not have a Canon camera, so I would prefer someone like Rolf or Craig who use Canon gear, to comment on the following suggestion first:-
Have you ever updated the camera's firmware (the software in the camera that runs all of its systems and features)? If not, it might be worth trying. You should be able to find and download the necessary files and instructions from Canon UK Support:
http://www.canon.co.uk/Support/
If you have not done this before, it will be important to read, and make sure you understand, ALL the instructions before you begin the procedure. It is not difficult but it must be done correctly. Alternatively, try to find someone locally who knows how to help you with it.
Cheers.
Philip
Posts: 24
Threads: 4
Joined: Nov 2013
Reputation:
0
Update on my Canon 60d problem, I eventually sent it away to be repaired, it was the shutter release, fitted new one & normal service has been resumed. Thank you to everyone who tried to help out, it was very much appreciated. Graham
Posts: 3,694
Threads: 243
Joined: Oct 2004
Reputation:
11
Glad your sorted
Posts: 2,744
Threads: 100
Joined: Jul 2013
Reputation:
7
Hopefully, a satisfactory ending. Ed.
May get more replies by starting this as a new thread.
To each his own!
(This post was last modified: Jun 25, 2017, 11:09 by EdMak.)
Posts: 2
Threads: 0
Joined: Apr 2017
Reputation:
0
According to Canon 60d Manual:
You may try changing the focusing method in the menu by following these steps:
- Press MENU.
Select the [Camera #4] tab.
Select [AF Mode].
Select [Quick Mode].
This will drop the mirror and black over the frame briefly to use the AF sensor to focus just like you were using the viewfinder instead of the LCD. When a focus lock is achieved, the camera will raise the mirror and the LCD will show an image again so you can take the picture.
Posts: 2
Threads: 1
Joined: Jun 2017
Reputation:
0
(Feb 2, 2015, 08:11)It sounds like a question for CanonUsa.com. Wrote: Wilf1954Hello can anyone help me? I have a Canon 60d, it's been working fine until suddenly it wouldn't take a picture, it auto focuses ok but when the shutter release button is fully pressed it sometimes works after a delay of no specific time, other times it won't work at all. I've checked settings over & over,also tried all the metering modes with no success, wondered if anyone has had the same problems or maybe an idea of what is going on.
Thanks in anticipation Graham
Posts: 2,744
Threads: 100
Joined: Jul 2013
Reputation:
7
Try a Factory Reset. Ed.
To each his own!
Possibly Related Threads…
Thread / Author
Replies
Views
Last Post
Users browsing this thread: 1 Guest(s)
|
